MUD UK Sliding Cubby Box Locker
The MUD Cubby-Box Locker provides additional 11-litres of internal storage in within the cabin of the Land Rover Defender.
Quickly and easily installed beneath the cubby-box the MUD Cubby-Box Locker frees up easy access extra storage space in your vehicle whilst at the same time creating discreet and secure storage location for valuables.
The MUD Sliding Cubby-Box Locker is ideal for Station Wagon and/or Double Cab vehicles. The cubby uses top quality Accuride stainless-steel drawer slides that run on ball bearings for smooth running and rattle free operation. Drawer slides feature a lock-out feature at full extension to ensure you retain easy access to items even when parked on steep inclines.
Two divider panels are supplied with every MUD Cubby-Box Locker to allow you to customise the internal compartments exactly how you want them. Rubber matting covers base of Cubby-Box Locker.
Each MUD Cubby-Box Locker contains three 28mm pre-drilled holes, one at the front and two at the rear of the locker for adding additional 12v or USB power sources.
The locker is supplied with blanking plugs if you have no need for extra power sockets - Please note power sockets are not included.
The raise in the overall height of the cubby-box provides a more convenient arm-rest position especially if you have already fitted MUD Seat Rails.
Supplied complete with fixing kit.
Lid locks in closed position
Sliding Locker top plate. 407 x 294mm
The MUD Cubby Box Locker is 109mm Deep.
Total dimensions without divider- 420mm x 245mm (depth 95mm)
If you have the internal divider in place- 345mm x 245mm (depth 95mm)
The MUD Cubby-Box Locker has been designed to fit the standard factory fit cubby-box fixing positions. The positioning of the cubby-box bolt holes may vary on Defender models. We have tried to accommodate all of those variations we found when developing the product, however, you may find you need to elongate the fixing holes in some vehicles especially when fitted with aftermarket cubby-boxes or where a vehicle has had a centre seat or document tray replaced with a cubby-box.
The loadspace bulkhead on the Defender ultimately limits how far the hinging MUD Cubby-Box Locker will tilt backwards. Other factors are the height of the cubby-box (especially on aftermarket boxes) and whether you have a bulkhead removal bar installed. We envisage use of the MUD Cubby-Box Locker will be restricted to occasional use so feel this is a compromise worth making for the extra storage the product provides.
The MUD Cubby Box Locker will not fit in Truck Cab models.
|OEM / Aftermarket||Aftermarket|
|Warranty||12 Months Warranty|
|Lead Time||Stock Item - usually ready for despatch|